User manual

18
www.supercircuits.com
SECTION 4: DVR SOFTWARE USAGE
18
The RECORD TIMER submenu is used to setup a recording schedule that repeats weekly.
• RECORD TIMER – Use the p and/or q buttons to change the setting (ON/OFF). When set to ON
press ENTER to open the submenu for setting the record time.
X axis 0 ~ 24 hours. Each time interval within a square is two hours divided into four 30-minute segments.
Y axis Sunday ~ Saturday
Operation
Move to the start time point then press ENTER to set the starting time (marked in red color). Use p, q, t, or
u to move forward in time to the ending time. Press ENTER again to mark the ending time (marked in yellow).
Press MENU to exit.