User manual
11H.264 Network DVR User Manual
SECTION 3: CONNECTIONS AND SETUP
4. Reinstall the DVR top cover.
5. Reconnect the power adapter.
3.2 Camera connection
Refer to the documentation supplied with your camera for installation and setup instructions. For most
cameras, the following must be completed before power is applied to the DVR.
3.2.1 Regular Camera Connection
Following is a typical method for connecting cameras to the DVR. Refer to the camera user
documentation for specic instructions.
1. Audio cable connection (optional) – Connect the camera audio output cable to an Audio IN
connector on the DVR.
2. Video cable connection – Connect the camera video output cable to the video input connector on
the DVR. If the camera provides audio, plug the video cable into the INPUT connector with the same
number as the connector where the audio (Audio In) is attached.
3. Power connection – Connect the power adapter to the camera.
3.2.2 Speed Dome camera RS485 cabling
Following is a typical method for connecting a speed dome camera to RS485 control signals from the
DVR. Refer to the camera user documentation for specic instructions.
1. Acquire an RJ11 cable of sufcient length and route it from the DVR to the speed dome camera.
> > > OPENING THE DVR ENCLOSURE WILL VOID THE WARRANTY < < <