User manual

4
www.supercircuits.com
SECTION 2: FRONT AND REAR PANEL CONTROLS
– Press for 4 channel display mode.
SEQ – Press to activate the call monitor function. Press again to exit Monitor mode.
POWER – Press and hold for 5 seconds to turn the DVR on/off. When the DVR is recording mode, stop
recording before turning off the DVR.
CH1 ~ 16 / CH1 ~ 8 / CH1 ~ 4 – Press the channel number buttons to select the channel to display.
PLAY – Press to playback recorded data.
p / q / t / u – Directional keys.
• In MENU mode to move the cursor up/down/left/right
• In PTZ mode to move the camera direction up/down/left/right
• Use to control recorded video playback:
— p – pause play
— q – to stop play
— u – fast forward
— t – rewind
AUDIO (SLOW + ZOOM) – Press to select live or playback sounds from the audio channels.
Live audio of the 1st audio channel Playback audio of the 1st audio channel
Live audio of the 2nd audio channel Playback audio of the 2nd audio channel
Live audio of the 3rd audio channel Playback audio of the 3rd audio channel
Live audio of the 4th audio channel Playback audio of the 4th audio channel
The audio channel is not selected.
PTZ – Select the PTZ camera channel and open a full-screen display, then press + SEQ at the same
time to enter/exit the PTZ control mode.