Specifications

=> loadb 100000
## Ready for binary (kermit) download ...
Ctrl-\c
(Back at denx.denx.de)
----------------------------------------------------
C-Kermit 7.0.197, 8 Feb 2000, for Linux
Copyright (C) 1985, 2000,
Trustees of Columbia University in the City of New York.
Type ? or HELP for help.
Kermit> send /bin /tftpboot/pImage
...
Kermit> connect
Connecting to /dev/ttyS0, speed 115200.
The escape character is Ctrl-\ (ASCII 28, FS)
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------
= 550260 Bytes
## Start Addr = 0x00100000
=> iminfo 100000
## Checking Image at 00100000 ...
Image Name: Linux-2.4.4
Created: 2002-07-02 22:10:11 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 550196 Bytes = 537 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
5.9.5.4. loads - load S-Record file over serial line
=> help loads
loads - load S-Record file over serial line
Usage:
loads [ off ]
- load S-Record file over serial line with offset 'off'
=>
5.9.5.5. tftpboot- boot image via network using TFTP
protocol
=> help tftp
tftpboot - boot image via network using TFTP protocol
Usage:
tftpboot [loadAddress] [[hostIPaddr:]bootfilename]
=>
5.9.6. Environment Variables Commands
5.9.6.1. printenv- print environment variables
=> help printenv
printenv - print environment variables
Usage:
printenv
5.9.6. Environment Variables Commands 62