Installation guide

Chapter 3. Boot Process, Init, and Shutdown 69
For example: KEYTABLE="us". The files that can be used as keytables start in
/usr/lib/kbd/keymaps/i386 and branch into different keyboard layouts from there, all
labeled
file .kmap.gz. The first file found beneath /usr/lib/kbd/keymaps/i386that
matches the KEYTABLE setting is used.
3.7.1.19. /etc/sysconfig/kudzu
The /etc/sysconfig/kuzdu allows you to specify a safe probe of your system’s hardware by
kudzu at boot time. A safe probe is one that disables serial port probing.
• SAFE=
value , where value is one of the following:
• yes — kuzdu does a safe probe.
• no — kuzdu does a normal probe.
3.7.1.20. /etc/sysconfig/mouse
The /etc/sysconfig/mouse file is used to specify information about the available mouse. The
following values may be used:
• FULLNAME=
value , where value refers to the full name of the kind of mouse being used.
• MOUSETYPE= value , where value is one of the following:
• microsoft — A Microsoft™ mouse.
• mouseman — A MouseMan™ mouse.
• mousesystems — A Mouse Systems™ mouse.
• ps/2 — A PS/2 mouse.
• msbm — A Microsoft™ bus mouse.
• logibm — A Logitech™ bus mouse.
• atibm — An ATI™ bus mouse.
• logitech — A Logitech™ mouse.
• mmseries — An older MouseMan™ mouse.
• mmhittab — An mmhittab mouse.
• XEMU3= value , where value is one of the following boolean values:
• yes — The mouse only has two buttons, but three mouse buttons should be emulated.
• no — The mouse already has three buttons.
• XMOUSETYPE= value , where value refers to the kind of mouse used when X is running.
The options here are the same as the MOUSETYPE setting in this same file.
• DEVICE=
value , where value is the mouse device.
In addition, /dev/mouse is a symbolic link that points to the actual mouse device.