Installation guide

274 Appendix A. General Parameters and Modules
Hardware Module Parameters
NCR SCSI controllers with
810/810A/815/
825/825A/860/875/876/895
chipsets
ncr53c8xx.o ncr53c8xx=option1:value1,
option2:value2,... OR
ncr53c8xx="option1:value1
option2:value2..."
Pro Audio Spectrum/Studio 16 pas16.o
PCI-2000 IntelliCache pci2000.o
PCI-2220I EIDE RAID pci2220i.o
IOMEGA PPA3 parallel port
SCSI host adapter
ppa.o
Perceptive Solutions PSI-240I
EIDE
psi240i.o
Qlogic 1280 qla1280.o
Qlogic 2x00 qla2x00.o
QLogic Fast SCSI FASXXX
ISA/VLB/PCMCIA
qlogicfas.o
QLogic ISP2100 SCSI-FCP qlogicfc.o
QLogic ISP1020 Intelligent SCSI
cards IQ-PCI, IQ-PCI-10,
IQ-PCI-D
qlogicisp.o
Qlogic ISP1020 SCSI SBUS qlogicpti.o
Future Domain TMC-885,
TMC-950 Seagate ST-01/02,
Future Domain TMC-8xx
seagate.o controller_type=2
base_address=base_addr
irq=IRQ
Cards with the sym53c416
chipset
sym53c416.o sym53c416=PORTBASE,[IRQ]
OR sym53c416 io=PORTBASE
irq=IRQ
Trantor T128/T128F/T228 SCSI
Host Adapter
t128.o
Tekram DC-390(T) PCI tmscsim.o
UltraStor 14F/34F (not 24F) u14-34f.o
UltraStor 14F, 24F, and 34F ultrastor.o
WD7000 Series wd7000.o
Table A-3. SCSI Parameters
Here are some examples of these modules in use:
Configuration Example
Adaptec AHA1522 at port 330, IRQ 11, SCSI
ID 7
aha152x=0x330,11,7
Adaptec AHA1542 at port 330 bases=0x330