User Manual

Optical pH Sensors | User Manual

2 SENSOR SETTINGS

Each optical pH sensor comes with an individual Sensor Code, containing important

information on adjustments for optimal sensor performance and pre-calibration of the

respective sensor type. Therefore, it is important to enter the Sensor Code of the

connected sensor into the Sensor Settings of the Pyro Workbench software. For multi-

channel

FireSting pro, the number of the channel tab must correspond with the channel

number at the

FireSting pro read-out device.

Important: Enter the correct Sensor Code for sensors connected to a channel at

a FireSting pro read-out device. The sensor code can be found on the label

attached to the cable (fiber-based sensors) or on the bag of contactless sensors

(see example below).

Sensor Code