User Manual
Optical pH Sensors | User Manual
© PyroScience GmbH 24
7 WARNINGS AND SAFETY GUIDELINES
Before using PyroScience pH sensors, carefully read the instructions and user
manuals for the respective PyroScience read-out device. The manuals are
available for download on www.pyroscience.com
Prevent mechanical stress (e.g. scratching) to the sensing surface at the tip of
the temperature sensor! Avoid strong bending of the fiber-optic cables and the
pH Minisensor. They might break!
Ensure that the complete sensing surface at the tip is always covered by the
sample and is free of air bubbles, and that liquid samples are stirred.
Calibration and application of the temperature sensors is on the user’s
authority, as well as data acquisition, treatment and publication!
PyroScience pH sensors and read-out devices are not intended for medical or
military purposes or any other safety-critical applications. They must not be
used for applications in humans; not for in vivo examination on humans, not for
human-diagnostic or therapeutic purposes. The sensors must not be brought in
direct contact with foods intended for consumption by humans.
The sensors must be used in the laboratory by qualified personnel only,
following the user instructions and the safety guidelines of the manual, as well
as the appropriate laws and guidelines for safety in the laboratory!
Keep the PyroScience pH sensors and read-out devices out of reach of children!
Store the temperature sensors in a secure, dry and dark place at room
temperature.