Installation manual

PCX 256 PROGRAMMING MANUAL
RINS868-6 Page: 63
SMS
Enter the mobile number. Press the key.
Select the partitions that you wish to be used.
NOTE: The primary partitions are A, B, C & D.
Press the key.
Stop on Success (For Content ID and SIA)
Enter : for No. Enter : for Yes
Press the key. Repeat for Partition Accounts
if applicable, press the key
ARC Account (For Content ID and SIA)
Use the numeric keys to program the account
number of the central station (this will be given to
you by your ARC). Press the key.
Note: If partition accounts have been enabled in
the previous option then you will have to assign a
different account code for each partition.
Using the numeric keys select the content types
you would like to use. Please see page: 60 for
the different types. Press the key.
Repeat for contents 17-32. Press the key.
Select the number of redials you require (0-15).
Press the key. Repeat for the Time Out (The
time that the panel will wait for a reply). Press the
key.
Test Calls
Enter : for No. (Default) Enter : for
Timed (If Timed is chosen you will need to enter
the hours and minutes – press the key).
Press the key. ARC Details will be
displayed. Repeat the above for any other ARC
stations you are using. Press the key.
‘Program Digi/SMS Calls?’ will be displayed,
press the key. ‘Program Digi Channels’ will
be displayed and Press the key. ‘Program
SMS Details’ will be displayed and Press the
key.
Account Ref
Enter an account reference if required (and the
‘NN’ for PABX Systems). Press the key.
Manufacturer Access
will be displayed
If you require access to this please contact
Customer Support.