Installation manual
PCX 256 PROGRAMMING MANUAL
Page: 52 RINS868-6
Visual Keypad Programming Procedure
ENGINEER TESTS
Engineer Tests
Using the and keys, scroll to
‘ENGINEER TESTS?’ Press the key
Sound To Play
Press the Gkey to select which sound which
sound you would like to hear. Press the key.
Walk Test
Press the key to enter Walk Test.
Select the partitions to be tested. Press the
key
The display will scroll through all the inputs not
yet tested. Walk test each input. As each input is
triggered, a chime will sound and that input will
disappear from the scrolling list. Press the
key.Once the last remaining input has been
tested, the following screen appears. Press the
key. ‘Walk Test’ will be display, press the
key.
Test Control?
To enter the Test Control press the key
Enter the number of the inputs you wish to soak
test and press . The input number shows on
the scrolling list. Repeat for each input to be
tested. To remove an input from the list, enter its
number again. Press the key.
Test Days Left
Enter the number of days the soak test will last.
Press the key. Enter the number of days the
soak test will revert to in the event a soak input is
triggered during testing. Press the key. ‘Test
Control’ will be displayed, press