Installation manual

PCX 256 PROGRAMMING MANUAL
RINS868-6 Page: 37
Visual Keypad Programming Procedure
ALARM RESPONSE
Alarm Response
Using the and keys, scroll to
‘ALARM RESPONSE? Press the key
Silent 1
st
Alarm
Enter : for Never (Default)
Enter : for Confirmed
Press the key
Disable Confirm On Entry
Enter : for No (Default)
Enter : for Yes
Leave as NO for use with DD243 clause
6.4.5 or change to YES for use with
DD243 clauses 6.4.3 / 6.4.4. Press the
key.
Inputs to Confirm After Entry
Enter the number of inputs to Confirm after
the Entry. (Leave at 2 to comply with
DD243)
Press the key.
Partition Starts
Enter : for Keypads
Enter : for Internal Sounders
Enter : for Bells Only
Enter : for Digi (Default)
Enter : for Confirm
For defaults see description above
Press the key. Repeat for Partition
Stops and then repeat the above for each
other partition and also for Fire, Gas, HU
and Disarm alarms
You will be returned to the Engineer Menu