Installation manual

PCX 256 PROGRAMMING MANUAL
Page: 22 RINS868-6
Visual Keypad Programming Procedure
CHANGE INPUTS
Shunt Inputs
Change Inputs
Using the and keys, scroll to ‘CHANGE
INPUTS?’
Press the key
Input
Select the input number you wish to program as
the shunt input. Press the key.
Input Type
Select the shunt input type (type 18)
Shunt Inputs
If you would like to select the shunt inputs for the
selected input press the key.
Enter the inputs you would like in the shunt list,
after each one press the key. Each input
selected will scroll on the display on the bottom
line. If the input you have selected doesn’t
appear, make sure that input is programmed
correctly (Intruder, Tamper, 24Hr or Access).
Once they have all been entered press the
key, and press the key again. ‘Input
Partitions’ will be displayed, follow the
instructions on page: 20 to program the rest.