User guide

T82 Identification
7
3 Identification
3.1 Nameplate
The right device?
Compare and check the data on the nameplate of the device against the requirements of the
measuring point:
1
11-30V / 23mA
OTMT82-xxxxx
HW 01.00.00-(1)
Temperature Transmitter
S/N 5B00240426C
FW 01.00.00-(1)
Made in Germany
Ta= -50…+85°C
2 3
4
5
A0016153
å 1
Nameplate of the head transmitter (example, Ex version)
1
Approvals with symbols, if available (as option)
2 Serial number
3 Device revision
4 Power supply and current consumption
5 Device designation and communication symbol
3.2 Scope of delivery
The scope of delivery of the device comprises:
• Temperature Head Transmitter
• Securing material
• Operating Instructions
•
Additional documentation for devices which are suitable for use in the hazardous area (0
1).
3.3 Certificates and approvals
The device left the factory in a safe operating condition. The device complies with the standards
EN 61 010-1 "Protection Measures for Electrical Equipment for Measurement, Control,
Regulation and Laboratory Procedures" and with the EMC requirements of IEC/EN 61326.
3.3.1 CE mark, declaration of conformity
The device therefore meets the legal requirements of the EC guidelines. The manufacturer
confirms a positive completion of all tests by fitting the unit with a CE mark.
3.3.2
HART
®
protocol certification
The temperature transmitter is registered by HART
®
Communication. The device meets the
requirements of the HART Communication Protocol Specifications, April 2001, Revision 6.0.