User guide

Operating menu and parameter description T82
44
Sensor n upper limit
(® ä 71)
Serial no. sensor
(® ä 71)
1) n = number of the sensor inputs (1 or 2)
Expert ® Sensor ® Sensor n ® Sensor Trimming ®
Sensor trimming
(® ä 72)
Sensor trimming lower value
(® ä 72)
Sensor trimming upper value
(® ä 73)
Sensor trimming min span
(® ä 73)
Expert ® Sensor ® Sensor n
1)
® Linearization ®
Sensor n lower limit
(® ä 71)
Sensor n upper limit
(® ä 71)
Call./v. Dusen coeff. R0, A,
B, C
(® ä 74)
Polynom coeff. R0, A, B
(® ä 75)
1) n = number of the sensor inputs (1 or 2)
Expert ® Sensor ® Diagnostic settings ®
Corrosion detection
(® ä 57)
Drift/difference mode
(® ä 57)
Drift/difference alarm category
(® ä 58)
Drift/difference set point
(® ä 58)
Sensor switch set point
(® ä 58)
Calibration counter start
(® ä 75)
Calibration counter alarm category
(® ä 76)
Calibration counter start value
(® ä 76)
Calibration countdown
(® ä 76)
Expert ® Output ®
Output current
(® ä 59)
Measuring mode
(® ä 77)
Lower range value
(® ä 53)
Upper range value
(® ä 54)
Out of range category
(® ä 60)
Failure mode
(® ä 60)
Failure current
(® ä 61)
Current trimming 4 mA
(® ä 61)
Current trimming 20 mA
(® ä 61)
Expert ® Communication ® HART configuration ®
Device tag
(® ä 77)
HART short tag
(® ä 77)
HART address
(® ä 77)
No. of preambels
(® ä 78)