Owner manual

Technical data Series 642

38 Pyromation, Inc.

9.0.6 Mechanical construction

Design, dimensions

Fig. 10: Dimensions in inches (mm in brackets)

• Display rotatable in 90 stages

Weight Approx. 1.6 kg (3.53 lb) (aluminum housing)

Material • Housing: die-cast aluminum housing AlSi10Mg with powder coating on polyester basis

• Nameplate: 1.4301 (AISI 304)

Terminals Cables / wires up to max. 2.5 mm

(AWG 13) plus ferrule

9.0.7 Certificates and approvals

CE mark The device meets the statutory requirements of the EC directives. The manufacturer confirms

successful testing of the device by affixing to it the CE mark.

Hazardous area approval Information about currently available hazardous area versions (FM, CSA, etc.) can be supplied by

your representative office on request. All explosion protection data are given in a separate

documentation which is available upon request.

CSA GP CSA General Purpose

Other standards and

guidelines

• IEC 60529: Degree of protection through housing (IP code)

• IEC 61010: Protection measures for electrical equipment for measurement, control, regulation

and laboratory procedures

• IEC 1326: Electromagnetic compatibility (EMC requirements)

• NAMUR: Association for Standards for Control and Regulation in the Chemical Industry