Owner's manual

 Copyright 2006 Pyromation, Inc., All rights reserved.
6 of 11 Phone [phone]
• FAX [phone] or [phone] • www.pyromation.com 442-D
Function group: BASIC CALIBRATION
Type of sensor
• V2H0
Entry of sensor used:
Sensor type Range start Range end value
(-10 to 75) mV -10 mV 75 mV
(10 to 400) Ω 10 Ω 400 Ω
(10 to 2000) Ω 10 Ω 2000 Ω
Pt100 DIN -200 °C [-328 °F] 850 °C [1562 °F]
Pt100 JIS -200 °C [-328 °F] 649 °C [482 °F]
Pt500 -200 °C [-328 °F] 250 °C [482 °F]
Pt1000 -200 °C [-328 °F] 250 °C [482 °F]
Ni100 -60 °C [-76 °F] 180 °C [356 °F]
Ni500 -60 °C [-76 °F] 150 °C [302 °F]
Ni1000 -60 °C [-76 °F] 150 °C [302 °F]
Polynom RTD -270 °C [-454 °F] 2500 °C [4532 °F]
Type B 0 °C [32 °F] 1820 °C [3308 °F]
Type C 0 °C [32 °F] 2320 °C [4208 °F]
Type D 0 °C [32 °F] 2495 °C [4523 °F]
Type E -270 °C [-454 °F] 1000 °C [1832 °F]
Type J -210 °C [-346 °F] 1200 °C [2192 °F]
Type K -270 °C [-454 °F] 1372 °C [2501 °F]
Type L -200 °C [-328 °F] 900 °C [1652 °F]
Type N -270 °C [-454 °F] 1300 °C [2372 °F]
Type R -50 °C [-58 °F] 1768 °C [3214 °F]
Type S -50 °C [-58 °F] 1768 °C [3214 °F]
Type T -270 °C [-454 °F] 400 °C [752 °F]
Type U -200 °C [-328 °F] 600 °C [1112 °F]
Polynom TC -270 °C [-454 °F] 2500 °C [4532 °F]
Pt100 DIN
Temp. Compensation
• V2H1
Selection of temperature compensation of the cold junction when using customer specific
linearization of the TC polynomial
Input:
None, Type B, Type C, Type D, Type E, Type J, Type K, Type L, Type N, Type R, Type S, Type T,
Type U
None
Measuring Unit
• V2H2
Enter engineering units.
Entry: °C, °F, K
°
C
Current output
• V2H3
Enter standard (4 to 20) mA or inverse (20 to 4) mA current output signal.
Entry: 4-20 mA
20-4 mA
4-20 mA
Value of 4 mA
• V2H4
Entry: For limits see unit function SENSOR TYPE
0.00
°
C
Value of 20 mA
• V2H5
Entry: For limits see unit function SENSOR TYPE.
100.00
°
C
Connection
• V2H6
• RTD connection
Entry of RTD Connection mode
Entry: 2 wire
3 wire
4 wire
3 wire