User Guide

PYROCLUSTER
REFERENCE 49
Gain
Gain set to 0% (left),
50% (center) and 100% (right).
Gain controls the noise intensity on the inside of the effect. A setting of 50% is used
as the center of intensity (the same number of bright and dark pixels).
Bias
Bias set to 10% (left),
50% (center) and 100% (right).
Bias controls the noise intensity on the outside of the effect. A setting of 50% is used
as the center of intensity (the same number of bright and dark pixels).
Low Thres., High Thres.
From left to right: Low Thres. set
to 0% and 50%, High Thres. set
to 50% and 100%.
These values set the low and high clipping limits of the noise range. The clipped
noise range between Low Thres. and High Thres. is stretched to ll the entire range
(0%–100%). Mainly you would increase Low Thres. to create more holes in the noise
and decrease High Thres. to create fewer holes.