User Guide

PYROCLUSTER
REFERENCE 41
Soften

This effect will be visible only when using more than one light.
Soften set to 0% (left),
50% (center) and 100% (right).
When Strength is high and Shininess is low you might see harsh backlight effects.
Increasing the Soften value will smooth out the regions affected.
Bump
Bump set to 0% (left),
33% (center) and 100% (right).
The Bump value has the most impact on the overall look of the nal effect. Higher
values will result in more surface deformation. This value can also be set negative
to invert the effect.