Operating instructions
Pre-lnstalla tion Assembly
#-
1.
After removing the packaging from the stove, lift the hopper lid, and remove all pre-packaged items that
were shipped in the hopper. Also open the stove door and remove all pre-packaged items.
2.
Using a
711
6"
socket or open end wrench, remove the two bolts from the bottom that secure the stove to
the wooden pallet.
3.
If your stove is a freestanding model, remove the pedestal from
its
box and place it beside the stove. With
a helper,
lift
the stove onto
its
pedestal base. Put the three
114"
bolts through the holes in the mounting flange
of the pedestal and into the three threaded inserts in the stove bottom. Two of these are where the stove was
originally secured to the pallet. Tighten all three fasteners with a properly sized wrench or socket
(318").
3.
If your stove is an insert model, refer to appendix
C
for shroud information
Remove
The
Two
Bolts
From
Under The Pallet
Attach Stove To Pedestal
By Inserting
Six
Bolts