Instructions

EN
30
Operating Manual: PX-1 - Smoke Alarm Device Operating Manual: PX-1 - Smoke Alarm Device
EN
31
Fig. 11 Name plate for smoke detector with
“Q” label (specications may differ)
1.3 Conformity
The smoke detector of the PX-I type
without “Q” label is certied according to:
• Regulation (EU) No 305/2011 ac-
cording to EN 14604:2005/AC:2008
The smoke detector of the PX-I
type with “Q” label is certified
according to:
• vfdb guideline 14/01 (Q)
• Regulation (EU) No 305/2011 ac-
cording to EN 14604:2005/AC:2008
1772-CPR-140140
14
Variante: V3-Q
Conformity in accordance with
EN 14604:2005/AC:2008 (CE)
The smoke alarm device is certified as
a construction product in accordance
with Construction Products Regulation
(EU) No 305/2011 according to
EN 14604:2005/AC:2008 (CE). The pro-
duction is monitored for unchanged com-
pliance with legal and normative require-
ments by periodic and independent checks.
The declaration of performance for
smoke detectors without “Q” label is
available at the following reference num-
ber at the manufacturer: k_89246
The declaration of performance for
smoke detectors with “Q” label is availa-
ble at the following reference number at
the manufacturer: k_78616
1 Notes on the
operating manual
We are glad that you have chosen our product
and we would like to thank you for your trust!
This operating manual contains informa-
tion and instructions for safe assembly,
commissioning, installation and mainte-
nance, as well as proper operation of the
smoke alarm device.
The instruction manual is intended to in-
crease the reliability and life cycle, and to
help avoid hazards and downtime, or a
loss of warranty claims.
It is absolutely necessary that the operat-
ing manual is read and understood.
For a better readability, the PX-I smoke
alarm device is hereinafter referred to as
“smoke alarm device” or “device”.
1.1 Scope of operating manual
The operating instructions apply only to
smoke detectors of the PX-I type with or
without „Q“ label.
1.2 Name plate and identication
The name plate of the smoke alarm de-
vice is located below the testing / stop
button (smoke alarm device cover).
Smoke detector without "Q" label
A smoke detector without „Q“ label is
not certified acccording to vfdb stan-
dard 14/01.
Fig. 10 Name plate for smoke detector without
„Q“ label (specications may differ)
Smoke detector with "Q" label
A smoke detector with „Q“ label has a
on the name plate.