User guide

MCS 3x series controller set-up User Guide : MCS-3800 Control Mapping
Page 9
The Mixer Section
The Mixer section contains controls used in the mixing process that can be mapped to Pyramix controls. The map-
pable controls are the motorized, touch sensitive faders, push buttons above the faders, and the five rotary encod-
ers.
Bank, Select and Page Buttons
The Page, Bank and Select switches are “hard wired” I.e. they cannot be user mapped. These buttons enable
switching between different layers of controller assignments. The four Bank buttons each select one of four fader
layers. This gives easy access for controlling up to 32 Pyramix mixer strips. Since the faders are motorized, they will
always reflect the position of the control they are actually mapped to.
The Page buttons, in conjunction with the Select buttons, are used to switch the rotary encoders between pages
of controllable parameters. This gives the encoders access to up to 40 control parameters per fader. To access the
assignments, first hit the Select button above any fader and then use one of the 8 Page buttons to select one of
the 8 pages of assignments for the rotary encoders.
For more information on Pages and or Banks, please consult the MCS-3000 Series User Reference Manual.
MCS3800 Mixer Section
MCS3800 Bank, Select and Page Buttons