User guide

MCS 3x series controller set-up User Guide : Adding an MCS Controller
Page 6
To add a new controller go to the Settings > All Settings > Remote Control : Controller page.
If no controllers are installed, or more need to be added, click on the Add button. This opens the Controller Prop-
erties dialog window:
Name
Type a suitable, friendly name in the Name field.
Driver
Select MCS 3000 from the Driver combo-box drop down list. For an MCS-3800 controller select the MCS3000
driver.
Properties
Once the MCS3000 driver has been selected, clicking on the Properties button opens the MIDI Configuration
dialog:
Choose the appropriate MIDI Input and MIDI Output device drivers corresponding to the ports your MCS con-
troller is physically connected to. Clicking on OK accepts the changes and Cancel ignores the changes.
Controller page
Driver Selection combo-box list
MIDI Input and Output selection dialog