User guide

MCS 3x series controller set-up User Guide : MCS-3800 Control Mapping
Page 13
If the control is mappable and is currently mapped, the status bar will display the corresponding Pyramix mapped
control E.g.:
Load mapping... This feature is not yet implemented and intended for future use.
Clear All... Pressing this button deletes all currently assigned control mapping.
Default Mapping
Load and Save This section enables the current mapping state to be saved from or loaded to the
current MCS device configuration.
Note: Once used, the defined Default mapping will be loaded every time a new con-
troller configuration is created.
The Control Tree View
The collapsible tree view in the right-hand pane contains all available Pyramix controls. The controls are classified
by category and are contained in specific folders.
MCS3000 Configuration dialog window Status Bar
MCS3000 Configuration dialog window
Project Information & Settings Controllers page