Installation guide

6.0

™

Installation Guide : IMPORTANT NOTICE:

Installation Guide

IMPORTANT NOTICE:

Please read the following information very carefully before attempting any installation. Failure to comply

with the precise instructions may result in damage to your Merging hardware. Please read this entire sec-

tion of the manual carefully before installation.

STATIC DANGER NOTICE:

Please note that the Mykerinos and Mykerinos-X boards contain delicate electronic components that can

be damaged or even destroyed when exposed to static electricity. Take all necessary precautions not to

discharge static electricity when touching any of the Mykerinos components.

INFORMATION FOR THE USER:

Mykerinos, Mykerinos-X and their daughter cards comply with the following specifications:

EMC Emissions

EN 55022 : 1994 /A1 : 1995 /A2 : 1997 Class A ITE emissions requirements (EU)

FCC 47 CFR Part 15 Class A emissions requirements (USA)

EMC Immunity

EN 50082-1: 1992 EMC residential, commercial and light industrial generic immunity standard.

FCC Notice

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept any interference received, including interfer-

ence that may cause undesired operation.

These limits are designed for providing reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions contained in this manual, may cause harmful interference to

radio and television communications. However,

there is no guarantee that interference will not occur in a particular installation.

Note: Connecting this device to peripheral devices that do not comply with CLASS A

requirements or using an unshielded peripheral data cable could also result in harmful

interference to radio or television reception. The user is cautioned that any changes or

modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate this equipment. To ensure that the use of this product does

not contribute to interference, it is necessary to use shielded I/O cables.