Installation guide

6.0

™

Installation Guide : First launch

Installation Guide

First launch

Important! After installation has been completed, please reboot the PC before attempting to

launch Pyramix Virtual Studio. Then open the VS3 control panel application.

Start > Programs > Pyramix > VS3 control panel

The default Tab Pane is Configuration.

For Pyramix systems with a single Mykerinos board:

Leave all default selections as they are, making sure the On Bus checkbox for your Mykerinos card is

indeed checked then save and exit the VS3 control panel application.

For Pyramix systems with a multiboard configuration:

• Make sure there is a check mark in the On Bus boxes for each board installed.

• Check that the Application combo box is showing Pyramix. If not, select Pyramix from the list.

•Select XDTDM from the Buses Mode combo box

• Select which board is to provide an external Video/TC reference with the radio buttons next to the

board icons.

• For now, leave the default DSP Allocation settings as they are.

• When the VS3 panel Do you want to save routing? dialog box appears, click on OK

• the VS3 control panel will close

Double-click on the Pyramix Virtual Studio desktop icon to launch Pyramix. The User Manual and

Quick Start Guide are available from within Pyramix and may be accessed via the Help menu or by

pressing F1, or online at merging.com

Troubleshooting

Please visit regularly:

www.merging.com

for the latest Troubleshooting Guide and FAQ sections.