Installation guide

6.0

™

Installation Guide : Pyramix Software Installation

Installation Guide

Pyramix Software Installation

Note: You must have full Administrator Access to install Pyramix.

Driver Signing

Important! Before attempting to install the Pyramix Virtual Studio software please check the fol-

lowing setting:

Start > Settings > Control Panel > System : Hardware

Click on the Hardware Tab, then click on Driver Signing. The Driver Signing Options dialog opens:

Make sure the middle option Warn is selected.

Note: This dialog is not available in Windows Vista. Vista is preset to Warn.

Running the Installer

Once the Mykerinos card(s) have been properly installed, you can now install the Pyramix 6.x software.

To install the Pyramix Virtual Studio 6.x software insert the Pyramix Virtual Studio CD-ROM. The installation

program will auto-start on a PC where auto-start is configured on. Otherwise, double click on the CD-ROM

icon.

Please follow the automatic installation procedure accepting the option to install unsigned drivers (one per

Mykerinos board) and re-boot your PC once setup is complete.

Note: If the installation appears to freeze for a long period please check that the Driver

Signing warning dialogue is not hidden behind another Window. Installation will not con-

tinue until you click OK in this dialog.

Windows Driver Signing Options dialog