Specifications

Section
4
page
113
Professional Audio
4
MCMelectronics.com
Product Questions Email: [e-mail] Email: [e-mail]
Follow us on:
Two Channel Wireless
Microphone System
Low cost wireless mic system is ideal for close range
situations where two mics are needed. VHF high band
operation (232~261MHz) and super heterodyne receiver
ensure good performance in karaoke and presentation
situations. System includes a two–channel receiver, which
simultaneously accepts the signal from the two included
wireless microphones. Mic channels have independent
level controls. Mics operate on standard 9V batteries
(#292-035), two included, which typically provide eight
hours of operation. Features: •Detachable mic antennas
•Auto mute circuitry •Two color display shows signal
and AF level •XLR and
1
⁄4" mixed output are provided
Specifications: •Range: 50' normal conditions,
100' max •110/220VAC operation
Order # Mfr. # (1-3) (4–up)
35-1860 PDWM2300 $84.99 $77.25
Two Channel Wireless Microphone System
✔2 preset VHF channels
✔2 hand held microphones
✔Independent and mixed outputs
Low cost wireless mic system is ideal for close
range situations where two mics are needed. VHF
high band operation (160~250MHz) and super
heterodyne receiver ensure good performance
in karaoke and presentation situations. Mic channels
have independent level controls. Mics operate on standard
9V batteries (#292-035), two included, which typically
provide eight hours of operation. Specifications: •Range:
50' normal conditions, 100' max •Frequency response:
40Hz~15KHz •S/N ratio: 80dB •Receiver output:
1
⁄4"
unbalanced 600ohm, 25mV (mic level) •Dimensions
(receiver): 2
1
⁄4" (H) x 16
5
⁄8" (W) x 9
1
⁄2" (D) •Dimensions
(mics): 1
5
⁄8" (dia.) x 10" (L) •Includes two 36" audio
cables, male
1
⁄4" to male
1
⁄4" •Power requirements:
110/220VAC switchable
Order # Mfr. # (1-3) (4-up)
35-1460 PDWM2000 $71.99 $66.95
Two Channel Wireless
Microphone System
✔Receiver acts as
drop in charger
✔2 preset VHF channels
✔2 hand held microphones
✔Single mixed outputs
Low cost wireless
mic system is ideal
for close range
situations where
two separate
microphones are needed. Each mic includes an internal
rechargeable battery pack, with the receiver acting as a
drop in charger. VHF operation (232.4~261.0MHz) and
super heterodyne receiver ensure good performance in
karaoke and presentation situations. Specifications:
•Range: 50' normal conditions, 100' max •Frequency
response: 50Hz~15KHz •Receiver output: Fixed level
balanced XLR, and variable level unbalanced
1
⁄4" (mic
level) •Power requirements: 110/220VAC
Order # Mfr. # (1-3) (4-up)
35-1780 PDWM3000 $94.99 $88.95
Microphone Stand with Die-Cast Base
High-quality mic stands are perfect for
all stage performance and studio applications.
Conventional cast iron base holds stand firmly
in place. •Adjustable height 33"~61" •Overall
weight: 9 lbs. •
5
⁄8" x 27 thread •Available in
black or chrome
Order # Finish (1-3) (4-9) (10-up)
35-2005 Black $25.99 $23.50 $21.25
35-2006 Chrome 25.99 23.50 21.25
Folding Microphone
Stand with Boom Extension
High-quality mic stands are
perfect for all stage performance
and studio applications. Included
31" counterweighted boom arm is
ideal for use with musical instruments.
Collapsible tripod legs weigh
considerably less and allow more
compact transport than conventional
solid base stands. •Adjustable height
37"~63" •Overall weight: 6 lbs. •
5
⁄8" x 27
thread •Available in black or chrome
Order # Finish (1-3) (4-9) (10-up)
35-2010 Black $29.99 $26.99 $25.49
35-2011 Chrome 29.99 26.99 25.49
Telescopic Boom Extension
Use with all standard mic stands
that utilize standard
5
⁄8" x 27 TPI threads.
Counterweighted boom arm is ideal for
use with musical instruments. •Length is
adjustable from 33"~51" •Available in
black or chrome
Order # Finish (1–3) (4–9) (10–up)
35-2020 Black $14.99 $13.49 $12.79
35-2021 Chrome 14.99 13.49 12.79
Microphone Desk
Stand with Boom
Perfect for conference, desktop and
vocal performance use. Cast iron base
holds microphone securely in place.
Overall height is adjustable from
12"~17", counterweighted boom
arm is 17.7" •Overall weight 4.5 lbs.
•
5
⁄8" x 27 threads •Available in black
or chrome
Order # Finish (1–3) (4–9) (10–up)
35-2030 Black $24.99 $22.50 $20.25
35-2031 Chrome 24.99 22.50 20.25
Spring Clip Mic Holder
Spring loaded mic clip will securely
hold a wide variety of microphone sizes
from 22mm~38mm (0.87"~1.5")
diameter. •
5
⁄8" x 27 thread brass insert
•Black color
Order # (1–3) (4–9) (10–up)
35-2060 $3.29 $2.99 $2.69
Standard Microphone Clip
•Three different sizes hold a variety of
microphone types •Each size has a 3mm
taper to match common mic shape •
5
⁄8" x
27 TPI brass insert •Black color
Order # Diameter (1–3) (4–9) (10–up)
35-2065 22mm (0.87") $2.49 $2.25 $1.99
35-2070 25mm (1.0") 2.49 2.25 1.99
35-2075 32mm (1.26") 2.49 2.25 1.99
Microphone Desk Stand
Perfect for conference and desktop
use. Cast iron base holds microphone
securely in place •Overall height: 4.3"
•Base diameter: 5" •
5
⁄8" x 27 threads
•Available in black or chrome
Order # Finish (1–3) (4–9) (10–up)
35-2025 Black $5.99 $5.49 $5.29
35-2026 Chrome 5.99 5.49 5.29
Microphone
Mounting Flange
Ideal for
permanently
mounting
microphones to
countertops, walls, tabletops, podiums and similar surfaces.
Perfect for use with flexible gooseneck extensions. •
5
⁄8" x
27 threads •Available in black or chrome •Mounting screws
not included
Order # Finish (1–3) (4–9) (10–up)
35-2035 Black $2.99 $2.69 $2.39
35-2036 Chrome 2.99 2.69 2.39
#35-2035
#35-2036
Flexible
Microphone
Gooseneck
Extensions
Use to extend
and add
flexibility to
any mic stand
or boom extension. Multiple units may be added together
for longer lengths. Ideal for use with flange mount
adapters. •
5
⁄8" x 27 threads •Available in black or chrome
Order # Length Finish (1–3) (4–9) (10–up)
35-2040 6" Black $2.99 $2.69 $2.39
35-2041 6" Chrome 2.99 2.69 2.39
35-2045 13" Black 4.49 3.99 3.59
35-2046 13" Chrome 4.49 3.99 3.59
35-2050 19" Black 5.79 5.29 4.69
35-2051 19" Chrome 5.79 5.29 4.69
#35-2045
#35-2046
Matching
Transformers
•Allows low
impedance microphone
to be used with high
impedance equipment
•500ohm~50Kohm
Fig. Order # Type (1-4) (5-9)
A 35-590 Female XLR to
1
⁄4" $7.59 $6.83
phone plug
B 35-595 Male XLR to
1
⁄4" 6.59 5.89
phone jack.
A
B