Specifications

Section
4
page
73
Professional Audio
4
MCMelectronics.com
Product Questions Email: [e-mail] Email: [e-mail]
Follow us on:
Tube MP Studio
V3 Preamplifier
The Tube MP Studio
V3 delivers warmth
and fatness to any
audio source while
maintaining an
exceptionally low-noise
signal path. While its
primary function is as a
microphone preamp with +48V phantom power, variable
gain and phase reverse switching, the Tube MP is also
an exceptionally versatile tube driven direct box for any
instrument source. Features: •+48V of Phantom Power
•Hand selected 12AX7A tube •Variable input and
output gain controls •XLR and
1
⁄4" inputs and outputs
Specifications: •Frequency response: 10Hz~20KHz
(±1dB) •Dynamic range: >100dB (20Hz~20KHz)
•THD: <0.1% •Dimensions: 2" (H) x 5.5" (W) x 5" (D)
Order # ONLY
555-10500 $75.49
Two Channel
Vactrol-Based Compressor
The ProVLA II is a tube driven Vactrol
®
-based
compressor/leveling amplifier designed to excel in any
professional audio environment. Superior performance and
an incredible tone makes the ProVLA II an indispensable
tool for tracking, mixing, mastering, dynamic control of
live sound sources or for use in broadcast audio. Features:
•Variable threshold, ratio and output controls •LED
metering indicates both average level and peak hold
•Accurate ten segment LED gain reduction metering
•Active balanced XLR and ¼" inputs and outputs
Specifications: •Frequency response: 10Hz~100KHz
(±.5dB) •Dynamic range: >100dB •THD: <0.1%
•Dimensions: 3.5" (H) x 19" (W) x 8.75" (D)
Order # ONLY
555-10510 $299.00
Tube Preamplifier System
Designed as the ideal preamp
for any application, the tube driven TPS II adds warmth
and texture to any audio source. This two-channel high
performance preamp uses a pair of hand selected 12AX7A
tubes in the low noise input circuitry. This, coupled with
ART’s proprietary V3™ (Variable Valve Voicing) and
variable input impedance allows the TPS II to deliver
incredible performance. Features: •Variable input
impedance •Improved V3 variable valve voicing presets
•LED input meter with analog output meter •Wide
frequency response 5Hz~50KHz •Automatically switches
between instrument and microphone preamp •Enhanced
OPL™ output protection limiter
Order # ONLY
555-10520 $185.00
Six Channel
Headphone Amplifier
The Art HeadAmp 6 PRO is a six channel stereo
headphone amplifier that includes a six channel auxiliary
input section. Features: •Separate bass, treble, balance,
and level controls •Front and rear panel
1
⁄4" output jacks
•XLR and ¼" balanced inputs •Operates in stereo and
mono •Auxiliary front mounted separate source input
•LED level indicators on all channels
Order # ONLY
555-10525 $199.00
Tube Preamplifier System
The Tube PAC from ART is a combination of the world’s
most popular tube mic/line preamplifier and optical tube
compressor. Features: •Combination tube mic/line
preamplifier and tube compressor •Two hand-selected
12AX7A vacuum tubes •Precision potentiometers
•+48V phantom power •Bypassable compressor circuitry
•Balanced XLR and unbalanced
1
⁄4" inputs and outputs
•Internal transformer Specifications: •Frequency response:
20Hz ~20KHz •Dynamic range: >90dB •THD: <0.1%
Order # ONLY
555-10530 $129.00
Pro Channel Microphone Preamp,
Compressor, and Equalizer
ART engineers have combined the world-renowned
Pro MPA, Pro VLA, and Tube EQ into a single product,
creating the world’s best-sounding and most affordable
professional recording channel. Features: •Selectable VU
metering (mic pre out, compressor out, or main out) •Tube
character and gain reduction LED arrays •Balanced XLR
and unbalanced
1
⁄4" inputs and outputs Specifications:
•Frequency response: 10Hz~20KHz •Dynamic range:
>100dB •THD: <0.1%
Order # ONLY
555-10535 $319.00
Microphone Preamplifier with Digital Outputs
The ART VoiceChannel is the perfect complete channel
input strip for recording, broadcast or high profile live
applications where maximum performance and detail is
required. The VoiceChannel combines a single Class-A
tube mic preamp, full-featured dynamics control, de-esser,
expander and semi-parametric EQ into one unit with
analog and digital output as well as the ability to direct
connect to any computer or laptop via integrated USB port.
Features: •Fully featured tube microphone preamplifier
with selectable plate voltage and variable input impedance
•Powerful parametric EQ selectable pre or post compressor
in signal path •Flexible digital connectivity including
ADAT lite-pipe/AES/EBU/S/PDIF/TOSLink digital output
supports 44.1~192KHz sample rates •USB direct-connect
to computer or laptop •See MCMelectronics.com for
detailed specifications
Order # ONLY
555-10540 $429.00
Microphone
Splitter/Combiner
The ART SPLITCom Pro can be used to split or combine
balanced low impedance microphone signals. Features:
•Low distortion with wide frequency response •Phase
inverter switch for subtractive combining •Galvanic
isolation to block phantom-power between channels
•Ground lift switch to reduce noise due to ground loops
Order # ONLY
555-10545 $35.49
Transformer Isolated
Microphone Splitter
The ProSplit provides one direct output and one
transformer isolated output from a single microphone.
Features: •Ground-lift switch on isolated output to reduce
noise due to ground loops •Attenuator pad switch on the
input that can be used to alternately connect a preamplified
(line-level) signal to the two microphone-level outputs
Order # ONLY
555-10547 $50.00
Two Channel Tube
Microphone Preamplifier
Features: The ART ProMPA II is the next generation
in affordable high-performance microphone preamp
technology. Each microphone input circuit, with selectable
48V phantom power, features variable input impedance.
The ProMPA II can be configured for dual mono or stereo
operation with selectable mid/side mic support, summing
the adjacent channel, to decode left/right signals.
Features: •Hand selected 12A x 7A tube •Variable
input impedance •XLR and
1
⁄4" inputs and outputs
Specifications: •Frequency response: 15Hz~120KHz (+0,
-1dB) •Dynamic range: >110dB (“A” weighted) •THD:
<0.005% •Dimensions: 3.5" (H) x 19" (W) x 8.75" (D)
Order # ONLY
555-10505 $299.00
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
DTI Dual
Channel
Ground
Loop
Isolator
The DTI™ is a
high quality, passive
solution to ground loop hum.
Dual, high quality isolation transformers provide ground
path isolation between components, while maintaining full
frequency response. Features: •Virtually indestructible,
extruded aluminum enclosure •
1
⁄4" TRS, XLR and RCA
input and output connection pairs, supporting balanced
or unbalanced lines •Two independent channels for
correcting two ground loops, or for processing a
stereo signal Specifications: •Frequency response:
10Hz~50KHz, ±0.5dB @ +4dBu •THD: 0.01% typical @
1KHz, +18dBu •Insertion loss: 0.4dB @ 100Kohm load,
5.5dB @ 600ohm load •Dimensions: 1.75" (H) x 4.2" (W)
x 3.5" (D) •Passive device, requires no power
Order # Model ONLY
555-7685 DTI $55.99