Specifications

ManualsBrandsPyramid ManualsAmplifierPR530A

Section

page

Professional Audio

Fax: 1-800-765-6960 Customer Service: 1-877-626-3532

1-800-543-4330

NET 30

Terms

S-Com Plus Dual Channel Signal Processor

The de-esser improves audio quality by removing “S”

from vocals and sibilance from overly bright signal

sources such as cymbals. Extensive metering includes

input/output, gain reduction, de-esser level, gate open/

close and limit. Specifications: •Frequency response:

10Hz~20KHz •Dynamic range: 116dBu (un-weighted)

•THD: 0.008% (effect out), 0.016% (effect in) •Max input

level: +21dBu •Max output level: +21dBu •Detailed

specifications available upon request •Model #S-Com Plus

Order # ONLY

555-6556 $149.00

YEAR LIMITED

3 WARRANTY

Two Channel 31 Band Equalizer

Feature packed 1/3 octave equalizer offers total control

of 31 frequency bands from 20Hz~20KHz. Constant Q

circuitry ensures that bandwidth of the selected frequency

stays the same, even when approaching the maximum

boost or attenuation. The gain/boost range may be set at

±6dB, or ±12dB for added flexibility and precision. Cut–

Only mode allows 0~12dB attenuation with full slider

range. Features: •Variable low cut filter from

15Hz~200Hz •Electronically balanced XLR and

⁄4" TRS

inputs and outputs •Relay controlled bypass switch, with

LED indicators •Center LED marker on each frequency

fader •Eight segment LED bargraph VU meter •Relay

power on circuitry to prevent speaker thumps •All steel,

rack mount chassis

Order # ONLY

555-7545 $229.00

Five Zone

Distribution Mixer

The model 405 mixer distributes two stereo sources

to each of five output zones, with individual control

at each zone. Each input zone handles separate left and

right balanced line level signal. Each output zone features

independent level control from input one and two, stereo/

mono selector with mono indicator and clip and signal

LEDs for each input. Compact rack mount chassis is

1RU high, and only 6" deep. All input and outputs are

balanced XLR.

Order # Mfr. # ONLY

555-8410 405 $185.00

Six Channel

Headphone Amplifier

Perfect for small studios, stage production and education

use, this headphone amplifier accepts two stereo sources

and provides independent level control to six headphone

outputs. Features: •Master L/R pan control •Master

stereo/mono mode selector •Stereo inserts for each

headphone output •Compact 1RU rack mount chassis

is only 6" deep •All connections are

⁄4" stereo female

Order # Model ONLY

555-8415 406 $145.00

Eight Channel

Personal Mixer w/EQ

The Model 418 mixer provides eight mono channels of

mic/line mixing to a single channel balanced output. AUX

bus in and out jacks allow two 418 mixers to be connected

together for control of 16 total input channels. Each input

features: •Balanced XLR mic or unbalanced

⁄4" line input

•Independent level and tone controls •Switchable 12VDC

phantom power •Each unbalanced line input may be

converted individually to line output with simple internal

jumper change •Compact rack mount chassis is 1 RU high,

and only 6" deep

Order # Model ONLY

555-8425 418 $185.00

Eight Channel

Microphone Splitter

The ART S8 can be used to split eight balanced low

impedance microphone signals into sixteen balanced low

impedance microphone signals (eight pairs). Each channel

of the S8 provides one direct output and one transformer

isolated output from a single microphone. Features: •Ideal

solution for splitting microphone sources to feed multiple

mixing consoles •Passes phantom power from main mixer

•Individual ground lift on each channel •Individual pad

switch on each channel

Order # ONLY

555-10515 $149.00

NEW!

Front

Back

31-Band Single-Channel

⁄3

Octave Equalizer

Available in single or two-channel versions, these feature

packed equalizers offer total control of 31 frequency bands

from 20Hz~20KHz. Each band provides 20mm slides,

switchable 6dB or 12dB of boost or cut, for precise

tonal control. Adjustable high and low pass filter

allow additional control for removing noise and

rumble. Features: •Adjustable 10Hz~250Hz low cut

filter •Adjustable 3KHz~40KHz high cut filter •Active

balanced and unbalanced inputs and outputs •XLR,

⁄4"

TRS and RCA type phono connections •Wide adjustable

range is compatible with consumer and pro gear •LED

clip level indicators •Ground-lift switch •Independent

bypass switch on each channel •Rugged all-steel rack

mount construction requires only 1RU height (two-channel

occupies 2RU) Specifications: •Frequency response:

20Hz~20KHz ±0.5dB •Channel separation: >50dB

•S/N ratio: 94dB •THD: <0.01% •Power requirements:

95~130VAC, 50Hz/60Hz

Order # Model Dimensions ONLY

555-3146 351 1.75" (H) x 19" (W) x 8.5" (D) $115.00

555-3147 355 3.5" (H) x 19" (W) x 8.5" (D) 194.11

#555-3146

#555-3147

15-Band Two-Channel

Equalizer

Feature packed 2/3 octave equalizer offers total control of

15 frequency bands from 20Hz~20KHz, on two channels.

Each band provides 20mm slides, switchable 6dB or 12dB

of boost or cut, for precise tonal control. Features:

•Active balanced and unbalanced inputs and outputs

•XLR,

⁄4" TRS and RCA type phono connections •Wide

adjustable range is compatible with consumer and pro

gear •LED clip level indicators •Ground-lift switch

•Independent bypass switch on each channel •Rugged all-

steel rack mount construction requires only 1RU height

Specifications: •Frequency response: 20Hz~20KHz

±0.5dB •Channel separation: >50dB •S/N ratio: 94dB

•THD: <0.01% •Power requirements: 95~130VAC,

50Hz/60Hz •Dimensions: 1.75" (H) x 19" (W) x 8.5" (D)

Order # Model ONLY

555-3145 341 $109.00

Eight– Channel

Ground Loop Isolator

Passive audio isolator utilizes eight high quality

transformers to separate input and output signal

grounds, thus reducing hum and ground-loop noise. The

transformers have flat and wide frequency response and

handle high signal levels while maintaining an isolated

balanced output. Each is wound 1:1, for unity gain

and are designed to be used with impedances from

600~100,000ohm. It fits easily into virtually any audio

system and is a clean patch point between all types of

equipment, providing balanced XLR,

⁄4" phone, and

RCA type phono connections on all inputs and outputs.

The mounting ears are reversible, allowing the XLR

connections on the front or the

⁄4" and RCA phono jacks on

the front. Completely passive design requires no power and

occupies only one rack space. Specifications: •Frequency

response: 10Hz ~50KHz •THD: .01% •Channel separation

90dB •Phase error: <5°, 20Hz~20KHz •Insertion loss:

0.4dB @ 100Kohm, 5.5dB @ 600ohm •Dimensions:

1.75" (H) x 19" (W) x 3.75" (D)

Order # Model # ONLY

555-7687 T8 $149.00

Tube Mic

Preamp

w/USB Output

Professional

quality audio interface

allows connection of mic,

instrument, and line level signals

to standard line level inputs as well as USB computer

inputs. Features: •USB output •Stackable extruded

aluminum chassis •Precision LED level metering circuitry

•Ultra low noise discrete microphone preamp front end

handles a wide range of input signal levels •High

impedance

⁄4” instrument input •High-quality 12AX7A

tube •Switch selectable high-pass filter removes very low

frequency rumble and wind noise •48V phantom power is

available •Phase invert switch •Up to 70dB of gain •Fast

FET limiter to prevent overload •Switch selectable input

impedance •Variable input and output level controls

•Requires 10VAC, 700mA •AC adapter included

•Dimensions: 1.75" (H) x 5.9" (W) x 6.5" (D)

•Model #TUBE-MPPSUSB

Order # ONLY

555-8432 $99.49

TUBE-MP

Microphone

Preamplifier

Considered the world’s