Specifications

Pyramid Innovation Ltd 12-08-2014

Issue 7

IQOQ Print Test Slide

The first time the printer is run it is important to run the IQOQ test.

Press the Setup button - Enter the password

Then press the Printer button

Then press the IQOQ button

The printer is ready to print a test slide. Ensure the slide is 76mm x

26mm x 1.0 – 1.2mm with a coloured marking area, preferably white.

Drop a blank slide into the opening at the top of the printer. The slide

orientation should be as shown on the display with the writing surface

facing forwards.

If the slide is not the correct way up the slide will drop through

unprinted and you will hear a warning sound.

The printed slide will drop into the collection tray.

The print quality of the first may not be good as the

tape may have moved in transit. If this is the case

print another slide. Hold the printed slide under the

front left corner of the printer so the blue lines of the

scanner meet.

When the barcode is scanned the display

will show OK and save the test result.

Press the Tick button to end the IQOQ test.

The IQOQ test can be run at any time.