User Guide
AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 3800
11pyramidtimesystems.com ADVANCED FEATURES
This function adjusts the printing position left or right on the time card. The default is set at
05.
14 - LEFT/RIGHT PRINTING POSITION ADJUSTMENT
This function adjusts the printing position up or down on the time card. The default is set
at 05.
Advanced Features
The following features are preset at the factory and should not need adjustment unless
the printing needs adjustment.
In SET mode, advance to mode 13.
Press “+” or “-” to select from 00 (down) to 09 (up).
Press “ENTER” to conrm.
The SET advances to “14”.
Continue to next steps or slide the “SET”
switch to the left to exit SET mode.
2
3
1
13 - UP/DOWN PRINTING POSITION ADJUSTMENT
4
5
In SET mode, advance to mode 14.
Press “+” or “-” to select from 00 (left) to 09 (right).
Press “ENTER” to conrm.
Slide “SET” switch to the left to exit SET mode.
2
3
4
1