User manual

File System 8-9

‘ip_accs.cfg’

It is possible to configure which IP addresses and what protocols that are allowed

to connect to the module. This information is stored in the file ‘\ip_accs.cfg’. The

file contains one or several of the headers below.

[Web]

[FTP]

[Telnet]

[Modbus/TCP]

[Ethernet/IP]

[All]

Under each header the allowed IP addresses are written. The wildcard ‘*’ can be

used to allow series of IP addresses. If a protocol header is not given, the system

will use the configuration set under the header ‘All’. If the ‘All’ header is not

given, the protocol will not accept any connections.