User manual

File System 8-7

Configuration Files

‘ethcfg.cfg’

This file contains the network configuration and is read by the module at start up.

The settings in this file are affected by SSI commands.

The components and format of the file is shown below:

[IP address] IP address

10.10.12.212

[Subnet mask] Subnet mask

255.255.255.0

[Gateway address] Gateway address

0.0.0.0

[SMTP address] SMTP address – This must be configured in

0.0.0.0 order to send emails

[SMTP username] The user name required by the SMTP server. Do not

username include this parameter if the server does not require

a username and password.

[SMTP password] The password required by the SMTP server. Do not

password include this parameter if the server does not require

a username and password.

[DNS1 address] Needed to be able to resolve host names.

0.0.0.0

[DNS2 address] Needed to be able to resolve host names.

0.0.0.0

[Domain name] The default domain name for not fully qualified

domain host names.

[DHCP/BOOTP] DHCP/BootP ‘ON’-Enabled, ‘OFF’-Disabled

OFF