User manual

Configuration 3-4

Display Panes

The BWConfig display is divided into 3 panes.

Tool Operations

The following operations are available through the BWConfig menus and tool

bar.

BridgeWay Configuration Module type and status information about the

BridgeWay module that was detected.

Ethernet Configuration Configuration of Ethernet network parame-

ters.

DeviceNet Configuration Configuration of DeviceNet network parame-

ters and status of the network interface.

New File Create a new BridgeWay configuration for the

selected type of module.

Open File Open a previously saved BridgeWay configu-

ration.

Save File Save the current BridgeWay configuration to a

file.

Refresh Device Status Refresh the module identity and status infor-

mation. This will update the current status

information shown by the tool. This can also

be used to start the detection process if a mod-

ule has not been detected by the tool, or the

connection has been changed to a different

module.

Upload Configuration Read the configuration that is currently stored

in the BridgeWay module. This will overwrite

any configuration that is displayed on the

tool’s user interface.

Download Configuration Send the configuration shown on the tool’s

user interface to the BridgeWay module.