Manualshelf

User manual

ManualsBrandsPyramid Solutions ManualsComputer equipmentAB7603
11121314151617181920
Installation 2-3
© 2011 Pyramid Solutions Inc. Publication PUB-AB7603-014
Connecting Power
The power connection is a 2-pin terminal block located on the end of the module.
The female terminal block connector is provided with the BridgeWay. Connec-
tions to be made are illustrated in Figure 2-2.
The BridgeWay requires 24 volts DC power. The module will start immediately
when power is applied (There is no On/Off switch on the module).
Figure 2-2 Power Connection