User manual

Status and Diagnostics 10-6

The page will display the status textually for many of the common status values.

However, to save web page size, a lot of the status values are only displayed

numerically. The following table describes the meaning of each status value.

Status Code Description

0Ok.

Note that this value will be used for nodes both in and out of

the scan list to indicate that there is no issue with the node.

60 Duplicate MAC ID test in progress.

This status is only used for the local MAC ID.

70 Duplicate MAC ID failure.

Another node on the DeviceNet network has the same MAC

ID.

This status is only used for the local MAC ID.

72 Device communications failed.

The I/O connections with a slave have timed out.

73 Incorrect device type.

Device verification has failed with a slave when attempting to

start I/O connections. The level of verification is determined

by the scanlist entry. The following identity information may

be checked during verification depending on the configura-

tion:

Vendor ID

Revision

Device Type

Product Code

75 CAN network quiet.

No CAN packets have been received from the network for

more than 10 seconds.

This status is only used for the local MAC ID.

Table 10-6 Node Status Codes