User manual

EtherNet/IP 6-7

The Command register is a bit string with the following bit definitions.

Bit Description

0 Local Run Mode. Used in conjunction with the Sys-

tem Run Mode bit in the Command register to deter-

mine the run mode of the BridgeWay. Both bits must

be set for the BridgeWay to be in Run mode; other-

wise the module will be in Idle mode.

1 Fault. Sets a fault condition in the BridgeWay.

2 Disable DeviceNet network.

3 Not used.

4 Reset the BridgeWay module.

5-31 Not used.

Table 6-7 Output Command Register Bit Definitions