User manual

Quick Start 4-13

Using the Ethernet File System

Step 1: Browse the file system

• Open a web browser window on the PC.

• Type ‘FTP://<IP address>’ in the address field. (Substitute <IP address>

with the IP address you are using for the module). (Don’t include the

“<“or “>” characters.)

• When prompted for a username enter “admin”.

• When prompted for a password enter “admin”.

You can now browse the file system. You should see subdirectories “/web”, “/

pswd” and “/user” and three files “/index.htm”, “/ehtcfg.cfg”, and “/telwel.cfg.

Step 2: Create some Files Using Telnet

• Click on the Windows ‘Start’ menu and select ‘Run.’

• Type ‘telnet <IP address>’. Substitute <IP address> with the IP address

you are using for the module. (Don’t include the “<“or “>” characters.)

Example:

telnet 65.106.35.252

• You will be prompted for a username, enter “admin”, and a password,

“admin”.

• The Telnet client will be opened, and connected to the module. You can

now browse the user file system using a command line interface.

• Type ‘help’ for a quick explanation on the available commands.

• Type ‘md mydirectory’. You have now created a directory called ‘mydi-

rectory’.

• Type ‘dir’ to view the directory.

• To move inside the directory, type ‘cd mydirectory’.

• Type ‘mkfile myfile’. You have now created an empty file called ‘myfile’.

Let’s put something in it.

• Type ‘append myfile “Easy file handling!”’. You have now added the line

‘Easy file handling!’ to your new file.

• View the files contents by typing ‘type myfile’