User Manual

【Operating Hints】
● Night Vision Monocular is the optical instrument to
obtain the images of objects under the low light and night
situation.
● Infrared Illuminator is equipped. It applies to use in
the full dark environment.
● Turn the infrared illuminator on when the
monocular works in the dark. Adjusting the
brightness of infrared illuminator regarding to the
distance of objects. Low level illuminance transducer
is equipped also. If there is any light resource existed,
the infrared illuminator need not to be turned on,
adjusting the focal length of objective lens only.
● Up to 1.5 hour runtime without the use of infrared
illuminator. Up to 1 hour with IR illuminator on.
1 2 3
4
5
6
7
8 9 10
1 - Objective Cover 2 - Objective Focus Wheel
3 –Battery compartment 4 - Infrared Illuminator
5 –Socket Door
6 - DOWN
7 - UP 8 -Feature choose button
9 -On off/feature confirmation button
10 – Eye cup
11
12
13
14
15
16
11 - Tripod Receptacle
12 - USB2.0 socket
13 – Charge Indicator
14 –[AV OUT] Outlets
15 – Micro SD card slot
16 –Hand Strap hole
【
Battery Installation
】
● Unscrew the battery
cover and insert the
battery with negative
electrodes bottomed (using a coin in the groove if
needed). The battery is installed correctly if the
screen could be lighten up after you screw the
cover back then press the Power button, if not,
please double check the above steps until the
viewer works normally.
● If the monocular doesn’t work, please return it for
repair after you reconfirm the battery is in good
condition and the cover has been screwed down
well.
【
Announcements
】
The model of battery shall conform to the
requirements.；
Ensure the electric quantity is full enough.；
Note the positive and negative electrodes.
Operating Hints
PSHTCM92
5
Components
PSHTCM92
6
Components
PSHTCM92
7
Operating Instructions
PSHTCM92
8