Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
11. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should be unplugged from the unit to prevent damage or corrosion. 12. Servicing The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Contact Pyle Technical Support for any issues: support@pyleaudio.com 13.
Location of Controls Main Unit Front View 1. LED indicator 2. Standby 3. / / Bottom View - Power off mode: LED indicator is off. - Operating mode: Blue light LED indicates Bluetooth mode. - Red light LED indicates charging mode. button button 4. VOL +/- button - While Power switch is set at ON position: Press and hold this button until a short melody sounds entering Bluetooth mode. Press and hold this button to turn the unit into standby mode.
Installation Battery Charging: The unit incorporated a built-in rechargeable battery. A battery compartment located at bottom of the unit. (1) Unscrew the Bottom cap counter-clockwise and open it. (2) Connect the micro USB plug of the USB cable to the micro USB connector of the unit. Red indicator lights up when charging the unit, light turns off when it’s full charged. Note: Battery Life: 4 Hours (Charge Time: 8 Hours) Please use standard DC 5V 1000mA adapter and supplied USB cable to charge.
Care and Maintenance - Do not subject the unit to excessive force, shock, dust or extreme temperature. Do not tamper the internal components of the unit. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. Specifications Output power: 1.
Compliance with FCC Regulations This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
