USER’S MANUAL SOUND ABSORBING WALL PANEL STUDIO FOAM WITH STAND PSIP24
Open the box and you will find below parts: 1* Foam (A) 1* Stand (B) 1* Steel flat bar welded with a small round tube (C) 1* Steel flat bar welded with a big round tube (D) 2* Steel flat bars (maybe connected with above two bars)(E) 8* Bolts( maybe connected with above two bars)(F) 1* Allen key(G) 1. Align the flat bar (C)(E) and (D)(E) with 4 holes on the foam(A) and use Allen key(G) and bolts(F) to put them together. Don’t tighten the bolts too much. 2. Open the legs of the stand. 3.
SOUND ABSORBING WALL PANEL STUDIO FOAM WITH STAND FEATURES AND SPECIFICATIONS Features • Quick and Easy Sound Isolation Setup • Lightweight & Portable Acoustical Sound Panel • Wedgie Wall-Pad Style Studio Sound Absorption • Assists in Achieving Optimal Audio Performance • Helps Promote the Flow of ‘Clean’ Sound Projection • Tested to Reduce Unwanted Noise & Sound Reflection • Reduces Vibration & Unwanted Audio Resonance • Stabilizes and Isolates Sound When Recording • Effective Noise-Reducing and Sound Damp
