User Manual

Allen wrench

A1,A2

-6-

-3-

Part 1a-Wood Stud Mounting

Use wall plate as a template, make sure it is level, and mark four mounting

holes along the center line of the wood studs. Drill four 3/16

)..

” (4.5mm)dia

holes 60mm deep. Level wall plate and attach to wall with four long

bolts(B1) and four washers(B3 . Tighten bolts firmly Do not overtighten

Part 1a-Wood Stud Mounting

Wood stud

60mm

3/16 (4.5mm)

”

Stud finder

Lift the screen and hook spacers(C1) on to the wall plate. Fasten the bottom of the

screen to wall plate using two selected bolts(A1,A2,A3) and two spacers(C2).

Tighten bolts firmly. Do not overtighten.