User Manual
Image adjustment
1、Rotate the lens into projector, the rotate it out slowly.At the same time,
looking at the resolution point carefully.When the image is clear, it is the
best situation of the lens
Focus adjustment
When you use the projector for the first time .It normally will
appear image faintness or the image is trapezoid. This is caused by
the wrong lens focus or trapezoid correction
Please follow the below steps to correct:
Keystone
1、If a projected picture has keystone distortion, correct image with
Keystone adjustment. The image becomes trapezoid shape when the screen
or projector is not leveled. Please reposition the projector to improve its
angle to the screen.However,the circumference of the image may not be
focused
(4) (5)
Screen
Projector
Hight
Porjector
Screen
Hight
Hight-feet
adjustment
Page
16
Page
11
Keystone