User Manual

19. Voltage Switch
The unit has a selectable input voltage from 115V/60Hz which is the
standard in the USA and Canada. You can also switch the input
voltage to 230V/50Hz for European operation. Please make sure
the switch is in the proper position before operating, otherwise
severe damage will result not covered by the warranty.
Input connections
The PT610 accepts a broad range of input sources, including:
Compact Disc (CD) Player
Cassette, Reel-to Reel or other tape player
Radio Tuner
Microphones (up to 4 simultaneously)
Equalizer
Signal Processor
Connecting front AUX jack
Permit you to connect one AUX MP3 devices with 3.5mm plug.
INSTALLATION GUIDELINES
Connecting a CD or tape player or tuner
In a normal installation, one would use the LINE JACK for connecting
a CD player, tape player or tuner.
4
Connecting an additional CD sound source
In this situation, use the AUX JACK, and set the MIC4/AUX
SELECTOR switch to the AUX position.