List ‘When you open the carton of projector, please check the full accessories Accessory list : Projector remote control power cable AV signal cable VGA signal cable manual spare fuse clear paper Purchasable accessory: 1. projector screen 2. projector ceiling mount 3. spare lamps 20 ‘warning: Please remember the model Number MODEL NUMBER: and series number if you need. And please check all accessories SERIES NUMBER: when you drop the carton package.
cutlet ‘Warning: when use this projector ,please read this manual carefully. If wrong operation ,it will cause electric shock or fire. So when use and repair this projector ,please comply with the following points. 1.Read mammal 9.protect the power cable Before use this projector please Please confirm the power cable read full manual carefully and are perfect when connect the operate according to this manual instruction. projector. 2.1 10.
hooting Problem The possibility reason © the input source choice is torrent? © Is there an input signal? 3.No Image | © the input cable connect well or not? in the screen Under PC mode, the PC output frequency is 50-60Hz ? Did u output your PC Signal to projector? i elation i 9 4 Auto-off The projector ventilation is block? after use The voltage is not stable. some times The projector is so hot ? Maybe the fan is broken .
on ruble PROJECTOR INSTALLATION TROUBLE SHOOTING Please use the setup instruction below: Please refer to this chapter when you encounter a problem. Speaker 5 It lists some simple problem solution . L k Serene . poles Sub woofer — > Problem The possibility reason Momentum |g power cable do not connect well. the power switch, the indicator light do not work. The power switch fuse is broken. 2.the remote The power switch turn on or off ? control cannot | @remote control do not have battery.
install Installation method: Contact a professional service man to mount this projector to a ceiling. Follow the instructions below for the correct projector positions: — Thad (D Front projection ceiling mount yy @ Rear projection Ceiling mount pro @ Front projection Table mount @ Rear projection Table mount Warning: 1) This projector might damage beyond repair when it is incorrectly mounted on a ceiling or when its incorrectly installed on a surface or installed on a incorrect surface.
ctr In Standard setting (Front projection) 6.Menu setting method Please refer to the following sheet , adjust your picture size and distance (from the lens to screen } Distance 4:3 16:9 60" 23m 2.5m 72" 2.68m 2.88m 100" 3.6m 3.9m Menu setting Language | Poppycock /Rarebit Restore default | YES/NO Blending OFF/LOW/MID/HIGH Indiscretion | OFF/58/108/158 The data maybe have 3% error,due to the image size according Upgrade (USB) | Software update to the distance between projector and screen .
ing chine 2. Parameter adjustment 0 a. Press "menu “key, until display the above ° — picture of the menu << (me b. Press “A/V” key, elect the option that | a ie need to adjust Press “OK” key, use “ «4/P” button = = to adjust the certain parameters Picture mode user Press the “menu”key again exit the rightness menu page parameter adjust station. he = d Shr ° . fra a 3. Picture Menu En 1.focus lens adjustment 2.input terminals trapezoid correction 3.power cables input 9.holes for ceiling mount 4.
Input Terminals HE=E interface name Function instruction VGA computer signal input Video composite video signal input AUDIOLOGY audio signal input Ypres component video signal input HDMI HDMI signal input Me Menu setting method 1. Using the projector, press “menu” The picture display on screen to adjust menu(picture I) . Press “ 4/P” key, the menu in turn circle into “picture” > “sound” > “time” > “system” . Select the adjust interface,use “A/V” key to choose the wanted item (picture II).
just me ‘When you use the projector first time.it normally will appear image faintness or the the image is trapezoid.It is the reason of lens focus or trapezoid correction . please follow the step the correction: Focus adjustment turn the lens into the projector; then turn it out slowly, at the same time, looking at the resolution point carefully, when the image is very clearly (take the middle area of the image), it is the best situation of the lens.
ke instr Panel keystroke sketch map O If the projector is the new one , please read “projector install” chapter, placed the projector, connect the power wire and the signorine, the operation as follow: Open operation 1.Before use the remoter . Put in two 7 size battery in it 2. Open the power switch on the backboard, the power light begin to flash. 3. press the power key on the remote control] or panel, the indicator light turn light. Power 4.
