User Manual

www.PyleUSA.com
FINAL ADJUSTMENTS
1. After checking that the speaker is in-phase and works correctly, angle the speaker for the
best sound.
2. Hand tighten rhe bracket knobs only, power tools may over-tighten rhe knob, and strip
the threads of the insert.
3. Check that the entire installatlon is safe and secure.
CONNECTING YOUR SPEAKERS
Connecting the speakers to your amplier or receiver.
Questions? Issues?
We are here to help!
Phone: [phone]
Email: [e-mail]
3
• First turn your amplier OFF to avoid
damage which may result from accidental
shorting of the speaker leads.
• Correct phase polarity is critical for proper
stereo imaging and bass performance.
The red (+) terminal on your amplier or
receiver must be connected to the red (+)
terminal on your speaker, the same
applies for the balck (-) terminal.
• Connect one loudspeaker at a time to
ensure proper connection of left and
right channels. Make sure all wires are
rmly fastened.
• If you notice a high lavel of bass or
central image focus, double check your
connections for proper polarity.