IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions — All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions — The safety and operating instructions should be retained for future reference. 3. Heed Warnings — All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions — All operang and use instructions should be followed. 5.
13. Nonuse Periods — The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for a long period of time. 14. Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 15. Carts and Stands — If the appliance is used with a cart or stand, the cart or stand should be a type recommended by the manufacturer. An appliance and cart combination should be moved with care.
Your new PYLE HOME PCM Amplifier gives you the power and versatility that you need in a professional sound system. The wide frequency response is perfect for the amplification of vocals and music. The talkover function for the Mic 1 and Aux Input located on the front panel make it perfect meeting halls, auditoriums, sports events, schools and office paging systems. Great for anywhere you need to deliver a special announcement with excellent sound quality.
FEATURES AND CONTROLS-BACK PANEL 6. BT/LINE Input Switch (For PCM21BT only ) Press in, it's Bluetooth Input status, and press it out, it's LINE input status. 7.Bluetooth Indicator 8 9 11 10 8. Bluetooth Antenna (For PCM21BT only) The antenna is best receiving for Bluetooth signal. 9.Voltage Switch This PA amplifier has selectable input voltage from 110V/60Hz ( the standard in USA and CANADA ) to 220V/50Hz ( for EUROPEAN operation).
SPEAKER CONNECTION One or more speakers (4, 8 or 16 Ohms) can be connected to the amplifier with or without transformers. However, before you connect any speakers to the amplifier, the total impedance must be calculated in order to avoid damage to the amplifier. A total speaker impedance greater than 8 Ohms or less than 8 Ohms can cause this damage to occur. SYSTEM 1: Single Speaker System NOTE : Connect the speaker (+) to the amplifier's 8-Ohm terminal.
SYSTEM 4 : Four Speakers in Series and Parallel NOTE : Although the description above is for connecting two series pairs of 8 Ohms speakers in a parallel hook up, you may also select to combine a series pair and a parallel pair in a parallel hook up, simply be sure you have calculated the total impedance, and attach the speaker (+) circuit wire to the proper amp terminal.
BLUETOOTH OPERATION INSTRUCTION (For PCM21BT only): External devices which have a built-in Bluetooth feature can be connected to this amplifier wirelessly to play through the amplifier's speakers. If your amp is connected to speakers, you will hear audible tones which will help for connecting. 1. At first be sure that the amplifier is powered on, and turn the volume to low. Please remember to connect the Bluetooth Antenna at the back panel for better receiving signal 2.
