Pyle PBC5200 3G Wi-Fi Mobile Power Bank and Router Integrator Quick Installation Guide
3G Wi-Fi mobile power bank and router integrator is a 3G network product for consumers, which integrates 3G routing, wireless routing, ADSL dial-up Internet access, wireless network storage, mobile power and other functions. This allows you to create a wireless network anytime and anywhere there is a LAN connection. You can easily share contents in digital devices with others.
2. Introduction of panel USB port: Connect the network card, card, mass storage device, or charge the phone DC charging interface Power Switch R: Power C: Charging 0: Off Charging Charging Indicator Battery indicator button Battery indicator Restore factory settings RJ45 network cable port 2.
2.2 Descriptions of Status Indicators Action Performed Indicator status Turn On the power Blue light always on Removable storage inserted Equipment 3G card inserted Insert ADSL network cable (PPPOE Mode) Network cable plugged into the router (Dynamic IP mode) Network cable plugged into the router (Static IP mode) Blue light flashes slowly (1.
3.
4. Mobile power function: Instructions for charging mobile phones, tablet computers and other digital products Step 1: Battery display. Before charging mobile phones, tablet computers and other digital products, check the battery level of the device itself, and follow these instructions: a) Press the battery indicator button. The battery indicator light should turn on and you can see the current battery percentage.
Android smart phones, and other mobile digital devices. Tip: Use original charging cable for cell phones to achieve the best results. Charge various devices via this USB port (Schematic diagram of charging devices) 5.
Charging Precautions: 1. Please choose the charging adapter where the output is 5V (output current is between 600 to 1000mA) Common charging adapters, such as adapters for iPhone or iPad, can be used. 2. Charging time: it will take about 5-8 hours with a charge of 5V 1000mA; 11 hours with a charge of 5V 600mA; It will take more than 12 hours if it is directly charged using a computer USB. 3.
Set up Wireless LAN Select a Network… Flight mode Wireless LAN Wireless LAN Notification Open Location Service Open Brightness and Wallpaper Digital Photo Frame General Mail, Contacts, Calendars Video Other… Photo Ask to Join Networks Memo Applications The computer will be automatically added to a known network, if the network is not known, it prompts to ask if you want to join a new network Step 3: View and set network parameters.
Set up Flight mode Ignore this Network Wireless LAN Notification Open IP address Location Service Open Brightness and Wallpaper Digital Photo Frame General Static IP Subnet Mask Router Mail, Contacts, Calendars Search Domains Client ID Video Renewal Photo HTTP Proxy Memo Close Manually Automatically Applications 6.2 Enter the configuration interface for 3G Wi-Fi router Click the Safari browser, enter: http://192.168.169.1, in the address bar.
6.
Second row icons: : Click on this icon to enter the setting interface for dynamic IP Internet. This will pop up at the bottom of the page. If your current Internet environment is through a wired network cable (Hotel Internet typically uses this method), then the IP address is assigned by the upper router. Please click on the "OK" button to complete the setting; otherwise click "Cancel." : Click on this icon to enter the setting interface for PPPOE dial-up. This will pop up at the bottom of the page.
Wireless network security/encryption settings Language Network Settings Set up a wireless network security/encryption to prevent unauthorized device access Wireless network settings Basic Settings Security Settings Client List DHCP server Network sharing System Management Safe Mode WI-FI Protected Access WPA encryption algorithm Password Private key update cycle OK Status Cancel Home Tip: a) In order to prevent your wireless network from unauthorized access by others, we recommend setting up wireless
By default the system is in automatic recognition mode, plug and play, users do not need to do any modification. Normally, you only need to select "Auto Detect" (automatic identification) for "USB 3G Modem" Model on the interface shown in the above figure, which can automatically set the dial number, APN user name and password and other information.This way, you only need to connect 3G modem to the router's USB port, and there’s no need to do any setting before completing 3G dialing.
6.6 To set the parameters of wired broadband Internet access In wired Wi-Fi mode, 3G Wi-Fi is equivalent to a wireless router, the Ethernet port works as WAN port, all of the wireless terminals only connect to the Internet via Wi-Fi router. Click the "Network Settings" → "WAN", choose the way to access the Internet according to the front-end broadband lines, and the router supports three kinds of common wired Internet: static IP, dynamic IP, PPPoE.
complete, click "OK". PPPOE mode User Name Password Confirm Password Manually Run Mode OK Cancel d) Wireless Repeater If you want to use the "Wireless Repeater" mode, simply check the "wan WiFi modes" item, click "Scan all AP", then select the name of the wireless network interface you want to relay, enter the password and click "OK" button.
6.7 Basic settings of WiFi wireless network Click on the left menu bar, "Wireless Network Settings" -> "Basic Settings", you can make basic wireless network settings of network mode, SSID, wireless channel, and others.
then plug a U disk / TF containing the upgrade file into the socket of the router, then click the [scan] button on the user interface, select the file you want to upgrade in the drop-down box, and click [OK] button. During the process of upgrading firmware, the indicator light of the router will flash quickly and constantly. While it is flashing, please do not turn off power of the router until the router's indicator goes off. After router upgrade is complete, it will cause the router to restart.
Firmware Update Language Network Settings Wireless network DHCP server Network sharing System Management Management Updating router firmware can add new features. Please copy the firmware for update to the flash drive, U disk or SD card. Then insert U disk/SD/flash drive card into the device, and then click the [Search] button. After you see the name of the selected firmware file, click the [OK] button to start the upgrade. The process of firmware update will take about 1 minute, please wait patiently.
Use a small needle, for example a paperclip, insert the paperclip into the hole indicated by the arrow, when you feel that it may contact the switch inside the unit, give the paperclip a push with force and hold it for 5 seconds, then release the paperclip, after that you can see the blue light flash which indicates the restoration to factory set is successful. 8.
Removable storage device file and directory browsing Current Location: /media List of files and directories Return Name Modified Time Size Return The storage1, storage2 ... are names of the shared folders of U disk, mobile hard disks. 8.2 FTP Server: The following describes how to use the iPad to share files on the FTP server of the router, here we cite Goodplayer as an example. GoodPlayer is not only a local media player, but it is an integrator of "Movie Player & Downloader & Streaming Media Player.
Step 3: Select the FTP client Download Manager, browser Complete Media URL SMB/CIFS Client UPnP/DLNA Client WebDAV Client FTP Client SFTP Client Step 4: Click the button at the upper right corner, enter parameters of the FTP server, click the "Save" button at the upper right corner.
FTP Server FTP Server IP address User name Password Port number Encoding format Passive mode IP Address: 192.168.169.1 Username: admin Password: admin Port Number: You can customize the value, and the default value is 21. Step 5: Back to main program interface of Goodplayer, click on the FTP server just added [FTP] 192.168.169.1 The storage, storage1, storage2 .... shows up after clicking Shared file storage1, storage2 ... are names of the shared folders on U disk, mobile hard disk.
Shared Folders 9200 data Double LAN ports Download Play this URL Copy Link Cancel Note: The above is only a simple introduction for Goodplayer to play files via Wi-Fi, if you need more details, please visit Goodplayer’s online help documentation. Goodplayer Settings upper right corner button Online Help 8.3Server The following describes how to use the iPad to share files on the server. Here we cite OplayerHD Lite as an example.
File server My Documents Open URL Step 3: Select the Windows Server and enter the address, authentication and other parameters of the server. Click the "Save" button at the upper right corner. Add Server Close Add Server Add Windows Servers Server Address Add Server Windows Servers Server Address Port FTP Server Dropbox Authenticate Document Management WIFI transmission User name Password Server Name Name IP Address: 192.168.169.
Password: admin Step 5: Back to main interface of OplayerHD Lite program, click the- server just added 192.168.169.1 File server Edit Download of the file list is finished My Documents Open URL Step 6: Open Share Storage, Storage1, Storage2 ... shared folders, and click a specific file. File server Edit Retreat My Documents Open URL Tip: For more information about the software, you can view OplayerHD help documentation, read frequently asked questions.
9. Solutions for Frequently Asked Questions 1. What can I do if I forget the WiFi encryption key? Press RESET to restore the router to factory settings, for details please refer to Section 7. 2. What do I do if I cannot log on to the router management interface? 1) Check if the IP address and DNS address are set to be obtained automatically. Normally the IP address obtained should be 192.168.169.X.
