User Manual

Transport buttons
Operating the transport buttons will transmit either control change messages
or MMC messages, depending on the assign type. For each of these six
buttons, you can specify the message that is assigned, the way in which the
button will operate when pressed, the control change number, or an MMC
command.
Assign Type [Control Change/MMC/No Assign]
Specifies the type of message assigned to the transport button. You can
specify that the button be disabled, or assign a control change message or
MMC message.
Button Behavior [Momentary/Toggle]
Selects one of two types of behavior for the button:
● Momentary:
A control change message with a value of 127 will be
transmitted when you press the transport button, and with a value of 0 when
you release the button.
● Toggle:
Each time you press the transport button, a control change message with a
value of 127 or 0 will be transmitted alternately. You can’t specify the button
behavior if the assign type is “MMC.” If you’ve specified “MMC,” an MMC
command will be transmitted each time you press the button.
● CC Number [0...127]
Specifies the control change number of the control change message that is
transmitted.
MMC Command [Stop/Play .../MMC Reset]
Selects one of the following thirteen types of MMC command as the MMC
message that will be transmitted. Stop, Play, Deferred Play, Fast Forward,
Rewind, Record Strobe, Record Exit, Record Pause, Pause, Eject, Chase,
Command Error Reset, MMC Reset
MMC Device ID [0...127]
Specifies the device ID of the MMC message. Normally you will specify 127. If
the device ID is 127, all devices will receive the MMC message.
8