User Manual

Assignable buttons
The button transmits a control change message. You can choose whether this
button will be enabled, the type of button operation, the control change
number, and the values that will be transmitted when the button is pressed.
These MIDI messages are transmitted on the Global MIDI Channel.
Assign Type [No Assign / Note/Control Change]
This specifies the type of message that will be assigned to the button. You can
disable the button (no assignment), or assign a note message or a control
change.
Button Behavior [Momentary/Toggle]
Selects one of the following two modes:
● Momentary
Pressing the button will send a control change message with the On value,
releasing the button will send a control change message with the Off value.
● Toggle
Each time that you press the button, the control change message will
alternate between the On value and the Off value.
Note Number [C-1...G9]
This specifies the note number of the note message that is transmitted.
CC Number [0...127]
Specifies the CC number of the control change message that will be transmit-
ted.
On Value [0...127]
Specifies the On value of the control change or note on message.
Off Value [0...127]
Specifies the Off value of the control change message. You can set this only if
the assign type is “Control Change.”
7